Skip Navigation Website Accessibility
 


NUX Queen of Tone Dual Overdrive Effect Pedal



On the left side of the pedal is the Horseman with SILVER mode. The Horseman is based on the legendary Centaur, with a modified circuit to access the secondary function by simply holding the foot switch~ SILVER mode. Carve out your tone with the Output, Treble, and Gain knobs, then try switching between the 2 modes: Gold and Silver, which offers massive headway usually requiring an 18v input. Gold Mode mimics its classic predecessor; the transparent Gold Centaur overdrive pedal and the Silver Mode is a powered-up version with an extended gain range (Silver Centaur).
 
On the right side of the pedal is the Morning Star with SHINE mode. The Morning Star is based on the legendary Bluesbreaker circuit: a very transparent, 
low gain drive. Like our Morning Star, it also features a simple foot switch hold to engage the iconic SHINE mode for a crystal clear treble-boosted tone.
 
By using the versatile routing and toggle switches, You can adjust the order of the overdrivesMS->HM or HM->MS. On the back of the pedal, you can toggle the BF/TB switch for Buffer-Bypass or True-Bypass, and the IFS/NORMAL switch to engage INPUT FET STAGE (IFS) to increase the input signal in order to reach the amp’s breakthrough edge that can drive the tube amplifier hotter.

Left side (Horseman)
OUTPUT knobControls the output level of the Horseman circuit.
TONE knobControls the treble frequency of the Horseman circuit.
GAIN knobControls the drive level of the Horseman circuit.
FootswitchEngage/disengage Horseman circuit. Hold it for 1 second, you can turn on/off SILVER mode

Right side (Morning Star)

DRIVE knobControls the gain of the Morning Star circuit.

TONE knobControls the treble frequency of the Morning Star circuit.

LEVEL knobControls the volume of the Morning Star circuit.

Footswitch? Engage/disengage the Morning Star circuit. Hold it for 1 second, you can turn on/off SHINE mode. 

SHINE indicator? While you engage SHINE mode, the indicator will turn on.

Routing toggle switch? You can adjust the order from Morning Star to Horseman or Horseman to Morning Star. It’s very useful to stack the sound.

INPUT? Connect your guitar side to the INPUT jack.

OUTPUT? Connect the OUTPUT signal to the amp side.

EXT. SW: You can use an external foot controller (like NUX NMP-2) to remote this pedal.

BF / TB toggle switch: BF means Buffer-Bypass, TB means True-Bypass. You can choose BF while you connect with several pedals in your signal chain to solve tone-loss situation.

IFS/NORMAL toggle switch: QUEEN of TONE can engage INPUT FET STAGE while you toggle to IFS position, that can increase input signal to reach amp’s breakthrough edge that can drive the tube amplifier hotter.

DC Jack

Use ONLY: 9V Negative Tip power with 100mA.